Glen flange has provided the highest quality custom forgings flanges for a wide range of industries since 2006, especially on shipbuilding industry, our team of specialists with over 20 years experience in shipbuilding industry, will help you find the right solution for your customized flanges.
Lap Joint flange
Lap Joint flanges are used on piping fitted with lapped pipe or with lap joint stub ends. The lap joint flange with the stub end assembly are normally used in systems requiring frequent dismantling for inspection and cleaning and where the ability to swivel flanges and to align bolt holes materially eases the erection of large diameter or unusually stiff piping. These flanges are also used in applications where there is a need to facilitate bolt alignment.
Standard |
ANSI/ ASME B 16.5 |
|
Type |
Lap Joint flange |
|
Dimension |
1/2” NB TO 24” NB |
|
Wall thickness |
SCH 5s 10s 20s 30s 40s 80s 160s XXS |
|
Material: |
Duplex steel |
A182 F51, UNS 31803/2205 |
Stainless steel |
304/304L 316/316L |
|
Alloy steel: |
A182 F1/ F5/ F9/ F11, F22 |
|
Carbon steel |
A105, A181 |
|
Copper nickel |
90/30, 70/30 |
|
Titanium alloy |
Gr2, Gr3, Gr5 |
|
Pressure rate |
150 PSI |
ANSIASME B16.5 Class 150 duplex steel Lap Joint flanges for heat treatment |
Application: |
Shipbuilding &Marine industry, Oil &gas industry, On/Off shore. |
|
Surface treatment |
Anit-oil, epoxy zinc rich primer(transparent/yellow/black), hot dipped galvanized and cold galvanized |
|
Certificate |
ISO9001:2008, CR, CCS,RS,BV,NK,RINA,LR,ABS,DNV,GL,TUV |
Warranty
We undertake to remedy any poor quality product, caused by low-quality Raw material or workman machine process or non-standard heat treatment for products Our liability is limited to replacing the defective products, which appear within a period of 12 months from date of invoice, provided from our storage, or produce new one